Abbildung intAct Battery-Guard
intAct Battery-Guard
Battery monitoring with Bluetooth transmitter and smartphone app for iOS or Android.

intAct Battery-Guardintact Battery-Guard - The battery monitor for all 12 volt batteries.


Battery monitoring with Bluetooth transmitter and iOS or Android app quickly and easily. Because only a fully charged vehicle battery will not let you down.

Features

  • For multiple batteries

    Visible display of four different vehicles on one screen. Even more vehicles can be created and used in the background.

    Your advantage: use one app for real-time monitoring of all your vehicles.

  • Very useful additional test functions

    In addition to the starter motor test during the start phase, the charging function is also tested during idling and at high speed.

    Your advantage: In addition to a faulty battery, factors such as a faulty starter,alternator or even a loose drive belt can come into question during the two test functions.

  • Push notification in case of critical voltage drop

    You can make individual settings when selecting the notifications.

    Your advantage: You will always be informed about voltage drops and abnormal starting processes as soon as you are within range of the Battery-Guard.

Characteristics

  • Suitable for all 12V lead-acid (wet, AGM, EFB or GEL) and 12V lithium (LiFePO4) batteries.
  • Monitor four vehicles simultaneously on the screen.
  • Bluetooth version 5.3.
  • App for iOS and Android.
  • No damage possible due to reverse polarity.
  • Power consumption only about 1.5 mA.
  • Very useful additional functions.

Details

Item nr. Volt Ampere Length mm Width mm Height mm
BATTERY-GUARD634513more
intAct Battery-Guard BATTERY-GUARD

BATTERY-GUARD

AccessoriesintAct Battery-Guard
Gewicht:0,04 kg
Where can I
buy this?

Charger Knowledge

Checking the battery step by step
There are many reasons for weakening or failing batteries. An important step in tracking them down is to measure the voltage with a battery tester. Here's how: 1. preparation Disconnect the battery from the vehicle, if possible remove it. Tips on how …
Chargers for rescue and safety vehicles
Emergency and rescue vehicles and other safety-related types of vehicles often sit around for months, but when it comes down to it, they need to be ready at a moment's notice to put out fires, rescue injured people or clear roads. Chargers like the Fronius …
Chargers for traction batteries
As with supply batteries, traction batteries are used in cyclic applications, i.e. the batteries are used until they are quite empty and are charged during idle times. Here, the charger is part of an effective drive application. The efficiency of the …
Charging correctly step by step
Tip: For full performance: Charge before first installation! 1. preparation Check that your charger matches the battery. Does the charger support the correct charging voltage? Does the charging current provided match the battery? What charging curve …
Why is the charging voltage of the charger important?
In principle, when charging, the electrons within the battery move from one electrode to the other, in the opposite direction to when they draw current, i.e. discharge. If a discharged battery is provided with too high a voltage from the current or voltage …
Cleanliness pays off
To ensure proper battery function, it makes sense to keep the battery surface clean and dry. Greasy or silicone-containing dirt on the lid can hinder the flow of current. Moisture on the battery can cause a short circuit in the worst case.
Transformer charger versus high-frequency charger
Transformer chargers with a downstream rectifier are relatively inexpensive, but they are large, heavy and less efficient than high-frequency chargers. They allow 1- to 3-step charging methods based on the W-characteristic (W, Wa, WaPuls, W0Wa, WU, WUWa …
Chargers for supply batteries
In order to supply the connected consumers permanently, supply batteries usually have a larger capacity than starter batteries, which are intended to deliver a lot of power, especially in the short term. Chargers designed for starter batteries reach their …
Batteries without vent hose
Only conventional, wet batteries need a vent hose, because they gas strongly during operation. The resulting steam can escape through the openings in the plugs. To prevent the vapour from damaging the vehicle, conventional batteries are vented to the …
Chargers in a workshop
Especially for workshops, there is another charger that supplies the vehicle with power during diagnoses and software updates on the vehicle electronics. During this phase, the vehicle management system requires a particularly large amount of power and …