Abbildung intAct Start-Stop-Power AGM
Symbol: Eignung für car
Symbol: Eignung für Wohnmobile
Symbol: Eignung für Marine
Symbol: Eignung für hybrid vehicles
Symbol: Eignung für taxi vehicles
Symbol Recycling efficiency 95 %
Symbol OEM quality
Symbol Maximum tipping angle 90º
Sealed maintenance-free AGM battery | electrolyte absorbed in glass fibre mats | wet charged

intAct Start-Stop-Power AGM Start. Stop. Keep charging.

Enables a high number of engine starts and supplies all consumers when the motor stops. Perfect for taxis, medium and high-end cars, SUVs and trucks with start-stop systems and micro-hybrids with brake energy recovery (recuperation).

Our recommendation for start-stop vehicles with high energy demand and micro-hybrids with recuperation.

Features

  • Quick charging.

    Due to AGM technology, this battery charges particularly quickly. Ideal for cabs, also good for recuperation.
    Your advantage: This battery recharges quickly, even on short trips.

  • Frequent start

    A special grid shape provides
    higher cycle stability than a standard starter battery.
    **Your advantage: withstands the short charging times and frequent engine starts better than standard starter battery.

  • Much starting power

    As AGM with large reaction surface on the glass fiber fleece, this battery has a high starting power even partially discharged.
    Your advantage: Also suitable for vehicles with high power requirements (e.g. those with auxiliary heating).

Characteristics

  • Excellent starting characteristics even at low charge level.
  • Higher cycle stability and cold start performance than a standard starter battery of same case size. Resulting in a longer life expectancy.
  • Fantastic recharging behaviour in the partial charge range.
  • Also for vehicles with high energy requirements and/or a lot of additional equipment.
  • Double lid with safety valve (VRLA), gas recombination and backfire protection. Leak-proof.
  • Sealed AGM battery with lead-calcium-tin grids.
  • For start-stop vehicles and micro-hybrids with brake energy recovery (recuperation) and fuel-saving systems.
  • Absolutely maintenance-free battery, where refilling is neither possible nor necessary.
  • Can also be installed at an angle, as the electrolyte is absorbed in glass fibre mats and the battery is tightly sealed.
  • Wet charged. Ready to use.
Recycling efficiency 95 %
Start-Stop
OEM quality
Maximum tipping angle 90º

All Types

intAct Start-Stop-Power AGM

Battery Volt Capacity CCA Length mm Width mm Height mm Pos. of terminal Terminal
AGM50SSi1250 AH (c20)800 A (EN)26017320611more
product image Starter Battery intAct Start-Stop-Power AGM AGM50SS

AGM50SS

Japan-Code:{jpn}

AGM50SS

Position of Terminal:1
Schema Schaltung 1
Volt:12
Terminal:1
Schema Endpol 1Schema Endpol 1
Capacity:50 AH (c20)
Base plate:B07
Schema Bodenleiste B07Schema Bodenleiste B07
Cold Cranking Ampere:800 A (EN)
Size:260 x 173 x 206 mm
Schema Batteriekasten T12

Kasten: T12
Where can I buy this battery?

Dealer online shop

Buy online

Locally

Dealer locator
Download datasheet
AGM60SSi1260 AH (c20)680 A (EN)24217519001more
product image Starter Battery intAct Start-Stop-Power AGM AGM60SS

AGM60SS

Japan-Code:{jpn}

AGM60SS

Position of Terminal:0
Schema Schaltung 0
Volt:12
Terminal:1
Schema Endpol 1Schema Endpol 1
Capacity:60 AH (c20)
Base plate:B13
Schema Bodenleiste B13Schema Bodenleiste B13
Cold Cranking Ampere:680 A (EN)
Size:242 x 175 x 190 mm
Schema Batteriekasten L02

Kasten: L02
Where can I buy this battery?

Dealer online shop

Buy online

Locally

Dealer locator
Download datasheet
AGM70SSi1270 AH (c20)760 A (EN)27817519001more
product image Starter Battery intAct Start-Stop-Power AGM AGM70SS

AGM70SS

Japan-Code:{jpn}

AGM70SS

Position of Terminal:0
Schema Schaltung 0
Volt:12
Terminal:1
Schema Endpol 1Schema Endpol 1
Capacity:70 AH (c20)
Base plate:B13
Schema Bodenleiste B13Schema Bodenleiste B13
Cold Cranking Ampere:760 A (EN)
Size:278 x 175 x 190 mm
Schema Batteriekasten L03

Kasten: L03
Where can I buy this battery?

Dealer online shop

Buy online

Locally

Dealer locator
Download datasheet
AGM80SSi1280 AH (c20)800 A (EN)31517519001more
product image Starter Battery intAct Start-Stop-Power AGM AGM80SS

AGM80SS

Japan-Code:{jpn}

AGM80SS

Position of Terminal:0
Schema Schaltung 0
Volt:12
Terminal:1
Schema Endpol 1Schema Endpol 1
Capacity:80 AH (c20)
Base plate:B13
Schema Bodenleiste B13Schema Bodenleiste B13
Cold Cranking Ampere:800 A (EN)
Size:315 x 175 x 190 mm
Schema Batteriekasten L04

Kasten: L04
Where can I buy this battery?

Dealer online shop

Buy online

Locally

Dealer locator
Download datasheet
AGM95SSi1295 AH (c20)850 A (EN)35317519001more
product image Starter Battery intAct Start-Stop-Power AGM AGM95SS

AGM95SS

Japan-Code:{jpn}

AGM95SS

Position of Terminal:0
Schema Schaltung 0
Volt:12
Terminal:1
Schema Endpol 1Schema Endpol 1
Capacity:95 AH (c20)
Base plate:B13
Schema Bodenleiste B13Schema Bodenleiste B13
Cold Cranking Ampere:850 A (EN)
Size:353 x 175 x 190 mm
Schema Batteriekasten L05

Kasten: L05
Where can I buy this battery?

Dealer online shop

Buy online

Locally

Dealer locator
Download datasheet
AGM105SSi12105 AH (c20)950 A (EN)39417519001more
product image Starter Battery intAct Start-Stop-Power AGM AGM105SS

AGM105SS

Japan-Code:{jpn}

AGM105SS

Position of Terminal:0
Schema Schaltung 0
Volt:12
Terminal:1
Schema Endpol 1Schema Endpol 1
Capacity:105 AH (c20)
Base plate:B13
Schema Bodenleiste B13Schema Bodenleiste B13
Cold Cranking Ampere:950 A (EN)
Size:394 x 175 x 190 mm
Schema Batteriekasten L06

Kasten: L06
Where can I buy this battery?

Dealer online shop

Buy online

Locally

Dealer locator
Download datasheet

Accessories
Charger

DEFA SmartCharge

Compact design for convenient charging of 12 volt batteries.


See product

Fronius Acctiva


Charge starter batteries professionally and supply consumers and on-board electronics.


See product
What is an AGM battery?
ABSOLUTELY MAINTENANCE-FREE
LEAK PROOF
DOUBLE LID WITH LABYRINTH
FIBERGLASS FLEECE
Do I need a start-stop battery or a normal one?
In start-stop vehicles, the engine stops every time the vehicle is in neutral. This saves petrol and reduces air pollution. However, this means an extremely high load for the battery. It has to start much more often, i.e. deliver high currents, than a …
Do I need an EFB or AGM start-stop battery?
If an EFB start-stop battery is installed at the factory, it can be replaced again with an EFB start-stop battery. An upgrade to AGM is always possible. If an AGM start-stop battery is installed at the factory, it may only be replaced with an AGM start-stop …
Our absolutely maintenance-free motorcycle batteries
intAct Bike-Power AGM, intAct Bike-Power SLA, intAct Bike-Power GEL, intAct Bike-Power HVT and intAct Bike-Power GEL HVT-HD are valve regulated lead-acid batteries or VRLA batteries (VRLA=Valve Regulated Lead-Acid). VRLA batteries produce much less gas …
What does absolutely maintenance-free mean?
Absolutely maintenance-free batteries are valve-regulated lead-acid batteries or VRLA batteries (VRLA = Valve Regulated Lead-Acid) that are sealed at the factory. Here, significantly less gas is produced than in wet batteries. The gas produced remains …
Why does this battery have such a good current draw?
Due to the AGM technology, this battery absorbs the current particularly well, i.e. it recharges faster than a conventional wet battery and you can charge it with a higher charging current or a more powerful charger, like the ? This characteristic comes …
What are start-stop batteries?
The EFB (Enhanced Flooded Battery) was developed for start-stop vehicles. This further development of the wet battery is significantly more cycle resistant, like the intAct Start-Stop-Power EFB. Because of the good current reserve, AGM batteries are also …
What is wear and what can you do about it?
With a worn battery, the active material has degraded due to excessive load. Modern vehicles with many consumers constantly place higher demands on the battery. The capacity of the installed batteries is often not designed for this. Prevention The choice …
Check battery externally before charging
If the battery box is damaged or deformed, replace the battery. Clean dirty terminals with a wire brush. Remove oils, fluids or other deposits. For batteries with plugs, check fluid level and refill to MAX with distilled water if necessary.
Removing the starter battery or motorcycle battery
If you want to remove a start-stop battery: inform the vehicle system before removal. First disconnect the negative cable (usually black), also called ground or earth, from the negative terminal of the battery. Then remove the positive cable (usually red) from the positive terminal of the battery.
What is sulfation and what can you do about it?
Sulphation or sulphation is an undesirable ageing process in batteries where too much lead sulphate forms on the lead plates, which cannot be removed even with prolonged charging. The battery's capacity drops significantly, or it fails altogether. Sulfation …
What is the point of vibration-proofing a starter battery?
Especially in trucks and other high-displacement commercial vehicles with diesel engines, there are strong vibrations that cause the battery to age prematurely. Our truck batteries in SHD versions are vibration resistant according to V3, like the intAct …
Identifying and filling the liquid level
Markings on the outside of the white or transparent housing of a wet battery indicate the minimum (MIN) and maximum (MAX) fill levels. During commissioning or initial filling, the battery must be filled with battery acid up to the upper mark (MAX). During …
Safety instructions for handling acid
Battery acid consists partly of sulphuric acid, which is highly corrosive. It attacks your skin, textiles and even metal. Put on protective clothing! So always wear gloves, safety glasses and possibly an acid-proof apron when handling batteries. Choose …
Also important for starter batteries: the consumers
Even before the engine is started, the starter battery has to do a lot and supply standard equipment such as the lighting system. This draws current from the battery, which is no longer available for starting. Nowadays, there are also a number of consumers …
Causal research for better purchasing decisions
Batteries age and fail. Sometimes it happens faster than you planned. If you know the cause of premature aging, you have a chance to make a more appropriate choice now: A battery that fits your technical requirements, intended use, and individual habits …
Installing the starter battery or motorcycle battery
First connect the positive cable (usually red) to the positive terminal of the battery. Then connect the negative cable (usually black) to the negative terminal of the battery. If you install a start-stop battery, you must then register the battery in the vehicle system.

What is a starter battery?

A battery that is charged by the alternator and starts the vehicle. For this purpose, the starter motor requires a lot of current for a short time. In addition to the cold start capacity (CCA), which indicates how much current the battery can ideally supply, the properties of a battery influence how reliably it can provide this starting power. A battery with very good charging properties recharges more quickly, for example, which benefits vehicles in city traffic in particular. It also supplies the consumers in vehicles without an additional back-up battery or supply battery. The more electrical consumers are installed at the factory or retrofitted, the more capacity is required to supply them when the vehicle is idling or at an engine stop and still reliably restart the vehicle.

Commissioning

A battery that is not fully charged when installed will not reach its full capacity in the future and will have a significantly shortened service life.

Even factory-filled and charged batteries can lose charge during storage. We recommend that you also fully charge them before installation.

You can find out how to do this in our step-by-step guide to charging your battery.

Maintenance and Care

Absolutely maintenance-free batteries are valve-regulated lead-acid batteries or VRLA batteries (VRLA = Valve Regulated Lead-Acid) that are sealed at the factory. Here, significantly less gas is produced than in wet batteries. The gas produced remains in the circuit of the battery due to gas recombination. As a result, these batteries lose significantly less liquid. They do not need to be topped up, and it is not even possible to do so, as they cannot be opened again without damage.

For which applications is the intAct Start-Stop-Power AGM suitable?

Symbol carcar
car, passenger car, cars, automobiles, vans, panel van
Symbol WohnmobileWohnmobile
Wohnmobile, Caravan, Motorcaravan, Motorhome, Campingbus, Reisemobil, Alkoven, Campingfahrzeuge
Symbol MarineMarine
Boats, ships, yachts
Symbol hybrid vehicleshybrid vehicles
hybrid vehicles, hybrid cars, hybrid electric vehicles, hybrid electric vehicles
Symbol taxi vehiclestaxi vehicles
Start-Stop batteries for taxi vehicles with increased engine starts and long supply of the consumers when the engine is not running.